The YD30, known as the Cobalt is a revolutionary low voltage motor driven door lock for 180º swing doors. It has been designed to secure double acting doors and addresses two of the biggest issues in door locking; 1) the ability to align a misaligned door and 2) the ability to release when requested, even with excessive load on the door.
The Cobalt is typically used in commercial doors and controlled by access control systems. This gives the user the ability to control access in and around a facility and provide traffic reports when desired. In addition, the Cobalt can be used in a simpler system where just controlling access to a single door can be implemented with a stand-alone access system.
Medium traffic volume, swing through pedestrian doors where door alignment or releasing when requested under sideload is required. Used extensively on double entrance doors in either mortice or surface installation as well as swing through glass doors where security is paramount, convenience required and appearances important. Seen in most market sectors but strong in Commercial, Healthcare, Airports and Government.
World-leading in innovation and engineering, the unique design of the Cobalt uses a collapsing mechanism that is deadbolted when locked but will unlock when requested even with 1,000N of sideload force on the door.
The pivot action of the Cobalt bolt pins will ‘grab’ the strike plate and pull the door into position for a misalignment up to 8mm in either direction.
With two 10mm thick stainless steel bolt pins, the Cobalt has a holding force in excess of 10,000N. In addition, onboard control provides auto relock for added security.
The Cobalt will draw as little as 40mA in standby and only 300mA in operation at 12VDC. Low current paired with high-security access control makes the YD30 a preferred product choice for many industry leaders. Offering an eco-friendly and economical solution, the Cobalt utilise a low power mode when in standby.
With user-selectable fail-safe and fail-secure modes, and multiple attempts to lock or unlock, the YD30 is ready for a wide range of application requirements. It can be integrated easily with access control or alarm systems.
The Cobalt can be morticed flush into both the side, or top of many door frames and comes with fitting tabs to make installation quicker. The lock is supplied with a matching strike plate as standard but additional items are available in the form of a housing and dress plate. These products allow the lock to be surface mounted when mortice installation isn't a preferred, or viable option. The housing and dress plates are supplied with self-adhesive tape for instant application to glass doors and door frames.
Tested for endurance for over 300,000 cycles, the Cobalt offers durability and safety in medium volume traffic environments.
Holding the EN14846 certification, the Cobalt has been tested and awarded the European Standard for strength, security, durability, and function of electrical and electronic components for all types of electromechanically operated locks and striking plates used on doors, window doors and entrance doors in buildings.
The Cobalt has been fire tested and approved for 30-minute, 60-minute, and 4-hour burn times to ensure our locks won't compromise a fire door's integrity or effectiveness.
Door Gap 6mm maximum
Static Strength 10,000 newtons (1,000Kg)
Sideload (release on request) 1,000 newtons (100Kg)
Endurance Cycle tested to 300,000 operations
Bolt Pin (2 pieces) 10mm thick, 13mm extension
Alignment ±8mm misalignment correction
Voltage at Lock 12-24VDC ±15%
Current Usage Holding: 40mA@12V,30mA@24VMaximum: 1.0A@12V, 0.5A@24V
Monitor Switch Ratings 24VDC, 0.5A
Materials Lock / Strike Plate: Stainless Steel 304Bolt Pin: Stainless Steel 17-4PH
Compliance and Certification CE Compliant, RoHS 2 Compliant, FCC Part 15 Compliant, EN 14846:2008 Certified, Suitable for use on fire resistant door sets
The Cobalt lock is user fail safe / secure configurable and is supplied with a long strike plate, mounting screws and fitting tabs.
For installations requiring surface mounting of the lock, a housing and dress plate are available. Both the housing and dress plates are supplied with self-adhesive 3M® tape for instant application to glass doors and door frames.
Name | Application | Lifecycle | Holding Gorce | Lock Dimentions | Bolt Pin Dimnetions | Power Usage |
YD30 ( Cobalt) |
Securung misaligned Double acting doors, relasing under sideload pressure |
300,000 | 1000kg | 255x30x51 | 10mm thick, 13mm extension (2 Pieces) |
Input Voltage : 12-24VDC ± 15% Current (Stand By) 40mA - 30mA Current (Peak) 1A - 0.5A |
YD30M ( Cobalt Mini) |
Securung misaligned single acting doors, relasing under sideload pressure |
300,000 | 1000kg | 160x30x51 | 10mm thick, 13mm extension | Input Voltage : 12-24VDC ± 15% Current (Stand By) 40mA - 30mA Current (Peak) 1A - 0.5A |
YD25 | Single Acting Doors | 1,000,000 | 1000kg | 210x25x42 | 12.7mm, 16mm extension |
Input Voltage : 12-24VDC ± 15% Current (Stand By) 130mA - 80mA Current (Peak) 1A - 0.5A |
YD25L | Double Acting Doors | 1,000,000 | 1000kg | 210x25x43 | 12.7mm, 16mm extension |
Input Voltage : 12-24VDC ± 15% Current (Stand By) 130mA - 80mA Current (Peak) 1A - 0.5A |
YD25K | Single Acting Doors | 1,000,000 | 1000kg | 210x25x44 | 12.7mm, 16mm extension |
Input Voltage : 12-24VDC ± 15% Current (Stand By) 130mA - 80mA Current (Peak) 1A - 0.5A |
YD38 | Single Acting Doors | 1,000,000 | 2000kg | 203x37.5x44 | 14.2mm, 14mm extension |
Input Voltage : 12-24VDC ± 15% Current (Stand By) 150mA - 90mA Current (Peak) 1A - 0.5A |
YD38L | Single Acting Doors | 1,000,000 | 2000kg | 203x37.5x45 | 14.2mm, 14mm extension |
Input Voltage : 12-24VDC ± 15% Current (Stand By) 150mA - 90mA Current (Peak) 1A - 0.5A |
YG80 | Securing all large openings, High strength, extream heat and cold enviroments |
300000 | 5000kg | 80x80x150 | 18mm, 30mm extension |
Input Voltage : 12-24VDC ± 15% Current (Stand By) 40mA - 30mA Current (Peak) 1A - 0.5A - 2A with heater |